TEKTRONIX SG 5030 PROGRAMMABLE LEVELED SINE WAVE GENERATOR/ CG 5011 PROGRAMMABLE CALIBRATION GENERATOR IN A TM 5006A POWER MODULE SUPPLY (GP-IB), MANUALS, AND HEADS AND CABLE (COMPLETE CALIBRATING SYSTEM).
The unit was just calibrated. Date Due 03/05/18. The unit is in great cosmetic condition. May have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial #s are B010884, B011269, B012681, C012154, B011357, and the system serial # is W020129. The Tektronix TM 5006A works with 120 & 240 voltage. We always re-check the item before we ship it. This makes sure the item is working, when it leaves my shop. NO other Options are marked on any of the pieces.
WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE (3) DAYS.
This oldy but goody, is one of the beast calibration systems for scopes that Tektronix ever made.
The SG 5030 Programmable Leveled Sine Wave Generator for the TM5000 series is the best choice when calibrating analog or digital scopes up to 550 MHz. It features: -- 0.1 Hz to 550 MHz frequency range -- Oscilloscope Bandwidth Calibration -- 4.5 mV to 5.5 V Amplitude Range -- Amplitude Flatness from 1.5% to 4% -- 20 Stored Front Panel Settings Uses the Tektronix 015-2350-01 Leveling Head.
The CG 5011 is used either manually, or as a part of an automatic calibration system to calibrate a wide range of oscilloscope parameters. The unit occupies three slots in this TM 5006 mainframe, and is programmable by GPIB. The CG 5011 complies with IEEE Standard 488.1-1987, and with Tektronix Standard Codes and Formats. Frequency: 40 ÁV to 80 mV: 10 Hz to 10 kHz. 100 mV to 10 V: +DC or: -DC, 10 Hz to 100 kHz. 12 V to 200 V: +DC or -DC, 10 Hz to 10 kHz. Features: *Vertical Gain *Horizontal Timing and Gain *Vertical Bandwidth/Pulse Response Characteristics *Probe Accuracy and Compensation *Current-Probe Accuracy *Calibrator-Output Accuracy *Next-Cal-Date Tracking *Uses the 015-0611-00 pulse head, 015-0310-01 comparator head, 015-2350-01 Amplifier Leveling head, and Tek. 012-0884-00 cable. The Tektronix TM 5006A has the IEEE STD 488 port GPIB on back.
This calibration system would be great for calibrating oscilloscopes and other test equipment.
WE HAVE ONE IN OUR LAB.
You get the Tektronix SG 5030 generator with leveling head, Tektronix CG 5011 generator with pulse head, Comparator head, & cable, all in a Tektronix TM 5006A module power supply, copy of the Tek. CG 5010/5011 Service & Operational manuals (2 volumes) on CD, Tek. SG 5030: Prog Leveled Sine Wave Generator Operators Manual on CD, Tek SG 5030 Sine Wave Generator, Ops, GPIB & Service Manual (3-volumes) on CD, and power cord. Again, it was tested and works fine!
GET THIS GREAT WORKING CALIBRATED, TEKTRONIX SG5030 PROGRAMMABLE LEVELED SINE WAVE GENERATOR/CG5011 PROGRAMMABLE CALIBRATION GEMERATOR IN A TM 5006A MODULE POWER SUPPLY (GPIB) AND HEADS AND CABLE (CALIBRATING SYSTEM) TODAY!
Buyer pays $240.00 shipping to Germany. We will bubble wrap it great and put in a double wall box for safe shipping.
I ship overseas by USPS, FEDEX or your FEDEX account.
The buyer (Overseas or Domestic) of all re-true items will pay the shipping cost back to
me, no matter the problem with the item! AGAIN, IF YOU RETURN THE ITEM TO ME,
YOU WILL HAVE TO PAY THE SHIPPING COST BACK TO ME.