YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, TEKTRONIX 370A PROGRAMMABLE CURVE TRACER WITH EXTRAS! It was just calibrated. Date due 01/05/19. The unit is in good to great cosmetic condition. It may have a small scratch here or there. All buttons, knobs, and switches are good and intact. There are some bad scratches on the back metal and on the side covers (see picture). The serial # is J301526. Will works with 120 & 240 voltage. NO options are marked.
WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE (3) DAYS.
RE-CALIBRATION MEANS, WHEN YOU BUY THE EQUIPMENT, IT WILL BE FULLY TESTED FROM THE LOWEST TO HIGHEST FREQUENCY, dB MEASUREMENTS, ALL FUNCTIONS, AND ALL SETTINGS. NIST STANDARDS ARE USED TO CHECK THE EQUIPMENT READINGS. IT IS WITHIN THE MANUFACTURER’S SPECIFICATIONS FOR THIS PIECE OF EQUIPMENT.
The Tektronix 370A Programmable Curve Tracer is a high-resolution curve tracer that takes high precision measurements of semiconductor devices in ranges of up to 2000 V or 10 amp sourcing, up to 200 watts, down to 1 nanoamp / 2 millivolt measurement resolution. It also has waveform comparison and averaging. In the R&D lab, it is used for characterization of new designs, extraction of SPICE parameters, failure analysis and data sheet generation.
In manufacturing test, the 370A is used to verify device quality and process monitoring. The 370A is used for incoming inspection to verify device performance, perform failure analysis and to match components.
INTERACTIVE PROGRAMMABLE CONTROL:
Interactive control of all measurements is accomplished from the full featured front panel or over the GPIB. Operating parameters can be adjusted and stored and recalled using several storage methods including the 370A nonvolatile memory, the built-in MS DOS-compatible floppy disk or to an external controller.
A test fixture is a standard accessory that provides safe device enclosure to ensure operator protection during measurements. The test fixture accommodates standard A1001 through A1005 adapters with Kelvin sensing, 3-Pin adapters without Kelvin sensing and the A1023 and A1024 surface mount adapters.
FEATURES: *** High Precision Measurements of Semiconductor Devices Up to 2000 Volts or 10 Amp Sourcing Up to 220 Watts 1 Nanoamp Measurement Resolution *** Down to 2 Millivolt Measurement Resolution *** Waveform Comparison *** Envelope Display *** Waveform Averaging *** Dot Cursor *** Kelvin Sense Measurements *** Fully Programmable *** 3.5Inch MS DOSCompatible Disk Storage to Save and Recall Setups.
APPLICATIONS: *** Manual or Automated High Resolution DC *** Parametric Characterization of Semiconductors *** Incoming Inspection *** Manufacturing Test *** Process Monitoring and Quality Control *** Data Sheet Generation *** Component Matching *** Failure Analysis *** Engineering.
Reasonable offers are always welcome! REASONABLE ONES!
You get TEKTRONIX 370A curve Tracer, cover, Three (3) manuals on CD, Tek. A1003 Adapter, Tek. 013-0124-00 Adapter, Tek. 013-072 Adapter, Tek. 013-0110-00 Adapter, Tek. 013-070 Adapter, and power cord. NO more. Again, it was tested and works fine! GET THIS GREAT WORKING CALIBRATED, TEKTRONIX 370A PROGRAMMABLE CURVE TRACER WITH EXTRAS TODAY! Buy from an experienced seller. Buy with confidence as feedback speaks for itself. Buyer pays $150.00 shipping in 48 states with insurance. We will bubble wrap it great and put in a double wall box for safe shipping.
WE DO SHIP OVERSEAS!