HP AGILENT KEYSIGHT 8133A 3 GHz PULSE GENERATOR WITH MANUAL!
It was just calibrated. Date due 06/20/18. The unit is in good to great cosmetic condition. It may have a small scratch here or there. The bottom feet are missing. The top cover has some bad scratches and marks on it (see picture). All buttons, knobs, and switches are good and intact. The serial # is 3318G00472. Will works with 120 & 240 voltage. NO options are marked.
WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE (3) DAYS.
RE-CALIBRATION MEANS, WHEN YOU BUY THE EQUIPMENT, IT WILL BE FULLY TESTED FROM THE LOWEST TO HIGHEST FREQUENCY, dB MEASUREMENTS, ALL FUNCTIONS, AND ALL SETTINGS. NIST STANDARDS ARE USED TO CHECK THE EQUIPMENT READINGS. IT IS WITHIN THE MANUFACTURER’S SPECIFICATIONS FOR THIS PIECE OF EQUIPMENT.
The 8133A is a generator from Agilent. A signal generator is a device that creates electronic signals, repeating or non-repeating, in the digital or analog domains, depending on need. Signal generators design, test, troubleshoot, and repair electronic devices across many different industries and applications.
The HP Agilent 8133A 3 GHz Pulse Generator provides pulses with programmable periods from 333 ps to 30 ns, full 3 GHz pulse capability on all channels. The pulse width can be programmed too, along with a delay or the interchannel delay. At these frequency ranges the transition time performance becomes critical; less than 100 ps is specified, less than 60 ps is typical, so excellent signal integrity is assured. And last but not least, a typical jitter of 1 ps creates precise and accurate timing conditions.
FEATURES: *** Frequency range: 15 MHz-3 GHz *** <100 ps transition times *** <5 ps pulse jitter *** ±0.5% ps Width Accuracy *** ±100 ps Width Accuracy *** ±150 ps Delay Accuracy *** 1 or 2 Output Channels *** SCPI Programming Commands *** Single output channel *** Low jitter *** Fast rise times (20%-80%) < 60 ps *** Delay modulation (jitter emulation) *** Variable cross-over point (eye deformation) LVDS applications can be addressed with output levels from 50 mV to 2 V PRBS from 25-1 to 231-1 *** All inputs and outputs are SMA (f) 3.5 mm connectors.
You get HP Agilent 8133A Pulse Generator, User Guide on CD, and power cord. NO more. Again, it was tested and works fine! GET THIS GREAT WORKING CALIBRATED, HP AGILENT KEYSIGHT 8133A 3 GHz PULSE GENERATOR WITH MANUAL TODAY! Buy from an experienced seller.
Buy with confidence as feedback speaks for itself. Buyer pays $60.00 shipping in 48 states with insurance. We will bubble wrap it great and put in a double wall box for safe shipping.
WE SELL OVERSEAS ON MY WEB SITE!