| HP - AGILENT 8753A NETWORK ANALYZER WITH OPTION 010 AND MANUAL!
Option 010 is Time Domain.
WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE WILL BE PROVIDED.
The HP 8753A provides excellent RF network measurements for the lab and production test areas. When combined with a test set, it yields a complete solution for characterizing the linear behavior of wither active or passive networks, devices or components from 300 kHz to 3 GHz. With two independent display channels available, you can simultaneously measure and and display the reflection and transmission characteristics of the device under test. The easy-to-use soft-key selection of measurement functions allows you to quickly measure the magnitude, the phase, or group delay characteristics of the device under test. Directly measure the electrical length of a single device or phase match multiple devices. Data can be displayed in a log magnitude, linear magnitude, SWR, phase, group delay, polar, real or Smith Chart formats. The two independent display channels can be viewed separately or simultaneously in overlay or split screen formats. The HP 8753A's integrated synthesized source provides >100 mw of output power, 1 Hz frequency resolution, and linear or logarithmic frequency sweeps.
All of the functions of the HP 8753A are completely programmable from an external computer through the Hewlett-Packard Interface-Bus. Draw/label custom graphics into the CRT of the HP 8753A using Hewlett Packard Graphics Language commands. The entire CRT display - including the custom graphics can be copied.
The HP 8753A (with Option 010) has the capability of displaying the time domain response of a network obtained by computing the Inverse Fourier Transform of the frequency domain response. The time domain response displays the reflection coefficient versus time, yielding the magnitude and location of each individual discontinuity of the network. It can also display the transmission coefficient versus time, yielding simulated transient response analysis of the network.
SPECS & FEATURES: *** 300 kHz to 3 GHz *** Integrated 1 Hz resolution synthesized source *** Direct save/recall to an external disc drive *** Time domain analysis *** 100 dB of dynamic ranges *** Group delay and deviation from linear phase *** 0.001 dB, 0.01 deg, 0.01 nanosec marker resolution *** Built-in accuracy enhancement *** OPTION 010.
For more information and Specs: http://www.teknetelectronics.com/DataSheet/HP_AGILENT/HP__8753A.pdf
I HAVE THE HP - AGILENT 8753C WITH HP - AGILENT 85047A S- PARAMETER TEST SET AND CABLES, HP - AGILENT 3577A NETWORK ANALYZER, HP - AGILENT 11858A FIXTURE ADAPTER, HP - AGILENT 11602B TRANSISTOR FIXTURE, AND HP - AGILENT 11590 "A" & "B" RF & DC BIAS NETWORK, ON DIFFERENT SALES. TAKE A LOOK, YOU MAY NEED THESE UNITS AS WELL.
It was just calibrated. Date Due 10/26/12. The unit is in good to great cosmetic condition. It may have a small scratch here or there. The top cover has three deep scratches on it (see picture). All buttons, knobs, and switches are good and intact. The serial # is 2803A02031. Will works with 120 & 240 voltage. We always re-check the item before we ship it. This makes sure the item is working when it left my shop.
You get the HP - AGILENT 8753A NETWORK ANALYZER, Copy of the Manual on CD, and power cord. NO cables. Again, it was tested and works fine! GET THIS GREAT WORKING CALIBRATED, HP - AGILENT 8753A NETWORK ANALYZER WITH OPTION 010 AND MANUAL TODAY!
Buy from an experienced seller.
Buyer pays $100.00 shipping in 48 states with insurance.
It will be bubble wrapped great and put in a double wall box for safe shipping. |
