WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE WILL BE PROVIDED.

Fluke Programmable Power Supplies meet the need of system builders and stand alone bench-top use. These supplies are compact, taking up only two engineering units of high. The front panel provides full access to all instrument functions, including voltage and current readback. An extensive set of protection features has been included to protect your Load or Device Under Test. Internal memory store 999 voltage and current settings. The linear series can both source and sink current. Because the sink level is programmable, the power supply can act as an electronic load.

SPECS & FEATURES: ••• Autoranging for maximum versatility with V & I ••• Linear Power Supplies with superior response time and noise performance programming and current source and sink capabilities ••• Single, dual and triple output versions ••• Rear panel outputs ••• Only 2HE high 19” rack-mount versions ••• Internal memory with 999 locations and (AUTO)STEP function allows definition of test patterns with no need for PC ••• Operating modes: - As voltage source (Constant Voltage supply) - As current source (Constant Current supply) ••• Easy system integration ••• GPIB/IEEE-488.2 interface standard ••• Extensive DUT (Device Under Test) protection functions: ••• Programmable Over-Voltage and Over-Current protection ••• Built-in metering (Readback) of actual measured V and I values ••• Sense lines ••• Coupled Protection, all outputs are limited or turned off when an error in any output occurs ••• Reprogramming delay allows controlled brief overloads ••• User-definable status register for error reporting Versatile power Fluke now offers two types of power modules : ••• Autoranging power modules for superior voltage and current versatility. The PM 2811, PM 2812 and PM 2813 offer autoranging in 60 W and 120 W, up to 180 W per mainframe. ••• Linear power modules with superior response time and noise performance. The PM 2831 and PM 2832 offer linear power modules from 120 W, up to 240 W per mainframe.

The PM 2800 series are built around a choice of 6 output power modules: ••• 30 V, 10 A, 60 W autoranging ••• 60 V, 5 A, 60 W autoranging ••• 60 V, 10 A, 120 W autoranging ••• 8 V, ± 15 A, 120 W linear ••• 60 V, ± 2 A, 120 W linear ••• 120 V, ± 1 A, 120 W linear.

Because of their modularity, these power supplies are available in a number of configurations, including single–, dual– and triple output versions with various combinations of power modules. Each output is independently programmable and isolated from other outputs. In total there are 36 models to choose from. See the back page for more detailed configuration and ordering information.

For more information from the Data sheet: http://www.powersensorrepairs.com/docs/FLU_PM2811_data.pdf

Here is the User manual: http://igor.chudov.com/manuals/Fluke-PM2813-User-Manual.pdf

Here is the Referance Manual: http://igor.chudov.com/manuals/Fluke-PM2813-Reference-Manual.pdf