| EIP 545A 10 Hz - 18 GHz MICROWAVE FREQUENCY COUNTER WITH OPTION!
Option 03 is OCXO Time Base.
WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE WILL BE PROVIDED.
The 545A Microwave Counter is an exceptional counter. A front-panel keyboard is used to enter general instructions to the microprocessor making this an easy to use instrument which is ideal for home, research laboratory, production, test bench or field environments. Frequency in the range of 10Hz to 18.0GHz is read directly from a 12-digit LED display which is sectionalized into GHz, MHz, kHz and Hz making it easy for even unskilled operators to make measurements quickly and accurately.
Three input bands are standard: Band 1 is from 10Hz to 100MHz (sensitivity of 25 mV rms) with 1 Mohm impedance (BNC); Band 2 is from 10MHz to 1.0GHz (sensitivity of -20 dBm) with 50-ohms impedance (BNC); Band 3 is from 1.0GHz to 18.0GHz (sensitivity: -30 dBm from 1.0GHz to 12.4GHz; -25 dBm from 12.4GHz to 18.0GHz) with 50-ohms impedance (TYPE N). Time base crystal frequency is 10MHz with an aging rate of <3 x 10-E07/month, 10MHz square wave (1 V p-p minimum into 50-ohms) output is available. Overall accuracy is ±(1 count + time base error).
Other features include: Test function (allows for front-panel diagnostics), Sample Rate control (variable from 100 ms to 10 sec) and a Reset control (resets display to zero and initiates new reading).
FEATURES: *** Three input bands are standard: Band 1 is from 10Hz to 100MHz (sensitivity of 25 mV rms) with 1 Mohm impedance (BNC); Band 2 is from 10MHz to 1.0GHz (sensitivity of -20 dBm) with 50-ohms impedance (BNC); Band 3 is from 1.0GHz to 18.0GHz (sensitivity: -30 dBm from 1.0GHz to 12.4GHz; -25 dBm from 12.4GHz to 18.0GHz) with 50-ohms impedance (TYPE N). *** Time base crystal frequency is 10MHz with an aging rate of <3 x 10-E07/month, 10MHz square wave (1 V p-p minimum into 50-ohms) output is available. *** Overall accuracy is ±(1 count + time base error). *** Other features include: Test function (allows for front-panel diagnostics), Sample Rate control (variable from 100 ms to 10 sec) and a Reset control (resets display to zero and initiates new reading).
For more information: http://www.teknetelectronics.com/DataSheet/EIP/EIP_54842550.pdf
I HAVE DIFFERENT COUNTERS ON DIFFERENT EBAY SELLS. SOME ARE 40 GHz. TAKE A LOOK AND SEE IF YOU FIND SOMETHING YOU LIKE.
It was just calibrated. Date Due 08/08/12. The unit is in great cosmetic condition. It may have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial # is 01290, Model 545A CCN, and other # 2204. Will works with 120 & 240 voltage. We always re-check the item before we ship it. This makes sure the item is working when it left my shop.
You get the EIP 545A counter, Operational and Service manual on CD, and power cord. Again, it was tested and works fine! GET THIS GREAT WORKING CALIBRATED, EIP 545A 10Hz -18 GHz MICROWAVE FREQUENCY COUNTER WITH OPTIONS TODAY!
Buy from an experienced seller.
Buy with confidence as feedback speaks for itself.
Buyer pays $50.00 shipping in 48 states with insurance. |
